แหล่งจ่ายไฟ 15W USB adjustable buck-boost usb power supply charging module 5V to 3.3-30V

แหล่งจ่ายไฟ 15W USB adjustable buck-boost usb power supply charging module 5V to 3.3-30V
แหล่งจ่ายไฟ 15W USB adjustable buck-boost usb power supply charging module 5V to 3.3-30Vแหล่งจ่ายไฟ 15W USB adjustable buck-boost usb power supply charging module 5V to 3.3-30Vแหล่งจ่ายไฟ 15W USB adjustable buck-boost usb power supply charging module 5V to 3.3-30Vแหล่งจ่ายไฟ 15W USB adjustable buck-boost usb power supply charging module 5V to 3.3-30Vแหล่งจ่ายไฟ 15W USB adjustable buck-boost usb power supply charging module 5V to 3.3-30Vแหล่งจ่ายไฟ 15W USB adjustable buck-boost usb power supply charging module 5V to 3.3-30Vแหล่งจ่ายไฟ 15W USB adjustable buck-boost usb power supply charging module 5V to 3.3-30Vแหล่งจ่ายไฟ 15W USB adjustable buck-boost usb power supply charging module 5V to 3.3-30Vแหล่งจ่ายไฟ 15W USB adjustable buck-boost usb power supply charging module 5V to 3.3-30V
รหัสสินค้า A3087
หมวดหมู่ เรกูเลเตอร์ Step Up&Down
ราคา 220.00 บาท
สถานะสินค้า พร้อมส่ง
จำนวน
ชิ้น
หยิบลงตะกร้า
บัตรประชาชน
บุ๊คแบ๊งค์
คุ้มครองโดย LnwPay
15W USB adjustable buck-boost power supply charging module 5V to 3.3-30V

โมดูลแปลงไฟขึ้นหรือลงให้คงที่ buck-boost power supply รับไฟเข้า 5V จาก USB
หรือ 4-13V ช่อง Input ให้เอาต์พุต 0.5-30V กำลังขับ 15W
มีวงจรป้องกัน short circuit, over current, over temperature, over power, over voltage protection, charging anti-backflow protection


หน้าจอ LED แสดงผลดิจิตอลโวลต์มิเตอร์ง่ายในการปรับค่า สามารถปรับค่าโวลต์และกระแสได้

highlights
  • 15W power, 2A current, can be used for router power supply.
  • As a USB input adjustable desktop power supply, you can adjust the output voltage arbitrarily, limit the current 0-2A (wide input 4-13V, wide output 0.5-30V any adjustment, with short circuit protection, short circuit does not burn)
  • As a USB charging cable, adjust the charging voltage and maximum charging current arbitrarily (any voltage, with constant current, anti-backflow, to meet the charging of most batteries)
  • Multiple protection (short circuit, over current, over temperature, over power, over voltage protection, charging anti-backflow protection) 
2. Product parameters
  • Input voltage: 4-13V (When using the pad input, be careful not to connect the positive and negative poles, do not connect the AC power)
  • Output voltage: 0.5-30V
  • Output current: 0-2A ( The output current in constant voltage mode is adaptive according to the load size, it is not adjustable. If you set the limit current to 1A, then the load current is greater than 1A, it will automatically enter the constant current mode. Maximum output 1A )
  • Output power:  less than 15W (when the output power is greater than 15W , the output is automatically turned off, display - OP- , after reducing the load power, press the ON/OFF button to solve ), when the input current is too large, it may be due to temperature protection. Can not work for more than 10W for a long time.
  • voltage display: resolution of 0.1V , the factory precision ± 0.1V or so ( if high accuracy requirements, can be manually corrected after comparison with a standard voltmeter )
  • Current display: resolution is 0.01A, range is 0-2.2A , factory precision is about ±0.05A ; when output current is less than 0.05A , display error is large, and small current within 10-40mA cannot be displayed ( if high precision is required, after comparison with standard manual meter calibration, the output current is greater than 1A when more accurate calibration, the calibration is not recommended for small current )
  • Power display: 0.00W-15.0W
  • Temperature protection : When the power component temperature is higher than 100 °C, enter the -OT-protection, reduce the load power, press the ON/OFF button to solve (the power will not enter the OT protection for long-term operation within 10W, when the input current is greater than At 3A, it may enter over-temperature protection when working for a long time, even if it does not reach 15W)
  • Working current: 30mA or so
  • Charging anti-backflow: Yes, it can be directly connected to the battery for charging, no need to add a diode
  • Short circuit protection: Yes
3. Function description
  
3.1. Button
 
“SELECT” button: short press – switch between voltage, current, power, wheel display; long press – enter or exit calibration mode;
 
“ON/OFF” button: Short press – control the output end to be turned on or off; long press – set the power-on default output to be off or on, long press for more than 3s to release, display ON for each power-on default There is an output, and the display OFF means that there is no output by default every time the power is turned on.
 
3.2. Potentiometer knob
 
The current adjustment potentiometer CC rotates clockwise to increase the limit current value. When the load current reaches the limit current, it enters the constant current state ( note that the output current can be increased without adjusting the potentiometer. At constant voltage, the output current is only Depending on the load, it varies according to the load );
 
Maximum output current (constant current value) setting method: switch to current display, directly short-circuit the output terminal to adjust the CC potentiometer, the current display current value is the maximum output current.
 
         The voltage adjustment potentiometer CV rotates clockwise to increase the output voltage.
 
3.3. Indicator lights
 
CC - Constant current indicator light, bright when constant current (red);
 
ON - output status indicator (green);
 
3.4. Input and output ports
 
The input side - the left side, the USB male head, the microUSB, and the pad are selected as inputs;
 
Output - right side, blue 2P terminal as output.
 

4. Accuracy calibration method
 
Output voltage calibration - When the digital tube always displays the voltage, press and hold the " SELECT " button for more than 3 seconds to release, the digital tube flashes, short press the " SELECT " button, the voltage value increases by one unit, short press the "ON/OFF" button. The voltage value is reduced by one unit. When the output voltage is low, it may take several times to see the value change 0.1V . Press and hold the “ SELECT ” button for more than 3 seconds to release the calibration mode.
 
Output current calibration - When the digital tube always displays current , press and hold the " SELECT " button for more than 3 seconds to release, the digital tube flashes, short press the " SELECT " button, the voltage value increases by one unit, short press the "ON/OFF" button. The voltage value is reduced by one unit. It may take several times to see the value change 0.01A . Press and hold the “ SELECT ” button for more than 3 seconds to release the calibration mode. . Note: the current greater than 1A calibration is more accurate; output current is less than 0.05A display error is large, the output current is less than 10-40mA may not be displayed.



วิธีการชำระเงิน

ขาย Arduino ,ซื้อ Arduino มั่นใจ AllNewStep


     ซื้อ Arduino กับ AllNewStep ขาย Arduino ตลอด 24 ชั่วโมง มั่นใจได้ 100% เราจัดส่งสินค้าทางไปรษณีย์ แบบ EMS / Best Express
แพ็คสินค้าอย่างดีปลอดภัย ส่งถึงมือลูกค้าอย่างแน่นอน 

              • ถ้าทำรายการสั่งซื้อสำเร็จ = มีของพร้อมส่ง ทางร้านจองสินค้าไว้ให้ 3 วัน

จัดส่ง วันอาทิตย์-วันศุกร์

ส่งแบบ EMS ได้รับ 1-2 วัน นับจากวันจัดส่ง

วันจันทร์-ศุกร์ แจ้งโอนก่อน 14.00 น. จัดส่งวันนั้น

แจ้งโอนวันศุกร์ หลัง 14.00 น. และวันเสาร์ จัดส่งวันอาทิตย์

แจ้งโอนวันอาทิตย์ จัดส่งวันจันทร์

ขาย Arduino การตรวจสอบเลขแทรคสินค้า Arduino

  • เมื่อจัดส่งแล้วทางร้านแจ้งเลขแทรคไปให้ทาง E-Mail ที่แจ้งไว้ตอนทำรายการสั่งซื้อ


ขาย Arduino ใบกำกับภาษี


ขาย Arduino สินค้าทุกชิ้นที่ซื้อกับทางร้าน AllNewStep

สามารถนำไปเบิกกับ หน่วยงานราชการ บริษัท ห้างร้าน ได้อย่างถูกต้อง จึงซื้อได้อย่างมั่นใจ


กรณีที่ไม่ได้นำไปใช้เบิก 
สามารถติ๊กออก ข้ามช่องนี้ไม่ต้องกรอกได้ ทางร้านออกเป็น ใบเสร็จรับเงิน / ใบกำกับภาษีฉบับย่อให้ แนบไปพร้อมกับสินค้า


ขาย Arduino ใบกำกับภาษีเต็มรูปแบบ

สำคัญมาก "ข้อมูลใบกำกับภาษีไม่สามารถเปลี่ยนแปลงหรือแก้ไขได้หลังการสั่งซื้อสินค้า"

ขาย Arduino ทางร้าน AllNewStep ออกใบกำกับภาษี/ใบเสร็จรับเงิน ลงวันที่ ที่แจ้งชำระสินค้าให้ลูกค้าทุกครั้งที่ทำรายการสั่งซื้อโดยแนบไปพร้อมสินค้า


ขาย Arduino ข้อมูลสำหรับออกใบกำกับภาษี 

ขาย Arduino โปรดตรวจสอบข้อมูลเหล่านี้ให้ชัดเจน ก่อนกรอกข้อมูล เพราะใบกำกับภาษีไม่สามารถเปลี่ยนแปลง หรือแก้ไขได้หลังซื้อสินค้า

  1. ชื่อสถานประกอบการเช่นสถานศึกษาบริษัทห้างร้าน
  2. ที่อยู่สถานประกอบการ
  3. เลขที่ประจำตัวผู้เสียภาษี
  4. สาขา

*** สำคัญมาก :: ข้อมูลจะต้องมีครบทั้ง 4 อย่างนี้ ถ้าไม่ครบ ทางร้านจำเป็นต้องออกใบกำกับภาษีอย่างย่อ เนื่องจากข้อมูลไม่ครบ


ขาย Arduino วิธีการชำระเงิน

    ชำระเงินผ่านธนาคาร เรามีหลายธนาคารให้เลือก ขาย Arduino เพื่ออำนวยความสะดวกให้กับลูกค้า

การทำธุรกรรมของธนาคารต่างสาขาหรือต่างธนาคาร จะมีค่าธรรมเนียมเพิ่ม แล้วแต่ธนาคาร กรณีมีค่าธรรมเนียมรายได้เป็นของธนาคาร ทางร้านไม่ได้ออกค่าธรรมเนียมให้

ถ้าทำธุรกรรมภายในธนาคารเดียวกัน จะเสียค่าธรรมเนียมน้อยที่สุดหรือไม่เสียเลย บางธนาคารจะไม่คิดค่าธรรมเนียมโดยจำกัดว่าฟรีได้กี่ครั้งใน 1 เดือน เช่นฟรีค่าธรรมเนียมเมื่อโอนในธนาคารเดียวกัน 5 ครั้ง/เดือน ผ่านทางตู้ ATM

ดังนั้น ควรเลือกโอนมาที่ธนาคารเดียวกัน จะเสียค่าธรรมเนียมน้อยที่สุดหรือไม่เสียค่าธรรมเนียมตามเงื่อนไขที่ธนาคารกำหนด

ขาย Arduino เมื่อชำระเงินผ่านธนาคารแล้ว 
กรุณาแจ้งที่หน้า แจ้งชำระเงิน https://www.allnewstep.com/informpayment
พร้อมแนบสลิป หรือภาพหน้าจอการโอนที่สำเร็จแล้ว ด้วยทุกครั้ง
เพื่อเป็นหลักฐาน และเก็บสลิปหลักฐานการโอนเงินไว้จนกว่าจะได้รับสินค้า

กรณีที่ธนาคารสลิปหมด หรือไม่มีสลิป สามารถแจ้งข้อความ รายละเอียดการโอนเงินได้ที่ เมนู ติดต่อ AllNewStep https://www.allnewstep.com/contactus ทางร้านจะดำเนินการตรวจสอบและรีบจัดส่งให้เร็วที่สุด

 

แนะนำจ่ายเงินผ่าน PromtPay ฟรีค่าธรรมเนียม หรือน้อยที่สุด Recomment 
สแกน QR Code นี่จ่ายได้เลย




ขาย Arduino AllNewStep มีอุปกรณ์สำหรับ Arduio ครบทุกอย่างที่อยากได้ จากทุกแห่งทั่วโลก ในราคาที่ถูกที่สุด  รับประกันคุณภาพ เสียเปลี่ยนตัวใหม่ให้ทันที ไม่ต้องรอ ไม่ต้องเสียค่าส่งสินค้ามาเคลม ขาย Arduino ตามรายละเอียดการรับประกันด้านล่างนี้

สินค้าทุกชิ้นมีรับประกัน 30 วัน ซื้อสินค้าจาก AllNewStep มั่นใจได้ รับประกันคุณภาพ ด้วยการมีประกันสินค้าที่ดีกว่าเราได้ตรวจเช็คและรับประกันสินค้าซื้อไปใช้ได้อย่างมั่นใจและสบายใจ เพื่อให้ลูกค้าถูกใจที่สุด 

ทั้ง นี้หากมีสินค้าที่ได้รับมีความผิดพลาดอันใด ที่อาจเกิดขึ้นได้  ไม่ว่าจะเป็นอุปกรณ์เสีย หรือความเสียหายระหว่างการส่ง โดยที่ลูกค้าไม่ได้เป็นคนกระทำ  AllNewStep รับประกันเปลี่ยนตัวใหม่ให้ทันที ภายใน 30 วันหลังจากได้รับสินค้า พร้อมออกค่าส่งสินค้าให้ ทั้งค่าส่งมา และค่าส่งกลับ ลูกค้าไม่ต้องรับภาระเรื่องค่าจัดส่ง โดยสามารถใช้กล่องเดิมส่งมาได้  โดยมีเงื่อนไขดังนี้

  • ขาย Arduino การซื้อสินค้า ถือว่าลูกค้ายินยอมและปฎิบัติตามเงื่อนไขและการรับประกันของทางร้านแล้ว กรณีไม่ตรงตามเงื่อนไข ทางร้านขอสงวนสิทธิ์ในการรับประกันสินค้า
  • ขาย Arduino คำแนะนำจากทางร้านเป็นเพียงข้อมูลบางส่วน อาจมีข้อมูลหรือเนื้อหาไม่ครบถ้วนทุกประเด็น ไม่สามารถใช้อ้างอิงได้ โปรดศึกษาข้อมูลเพิ่มเติมประกอบการพิจารณา
  • ขาย Arduino สินค้าอ้างอิงตามวงจรและสเปค ทางร้านรับประกันการทำงานถูกต้องทุกชิ้น
  • ขาย Arduino การสรีนสี/ข้อความ/สีของบอร์ด/อาจมีแต่ต่างบ้าง ไม่มีผลกับการใช้งาน ทางร้านขอสงวนสิทธิ์ในการรับประกันการสกรีน/สีของบอร์ด อาจมีความแต่ต่างบ้าง ซึ่งไม่มีผลกับการใช้งาน
  • การแจ้งรายละเอียดทาง sms ทางร้านอาจไม่ได้รับหรือตรวจสอบได้ล่าช้า เพื่อความรวดเร็วและไม่ผิดพลาด จึงขอยกเว้นช่องทาง sms
  • การสั่งซื้อจะสมบูรณ์เมื่อลูกค้าชำระเงินและได้รับใบเสร็จของทางร้านแล้ว ซึ่งสามารถนำมาใช้เป็นหลักฐานได้
  • สินค้า ต้องเขียนรายละเอียดปัญหาแนบมาด้วย ส่งมาพร้อมใบเสร็จรับเงินหรือสำเนาใบเสร็จรับเงิน จาก AllNewStep มาในกล่องด้วย เพื่อเป็นหลักฐาน สำคัญมาก กรณีที่ไม่มีหลักฐานใบเสร็จของทางร้าน ขอสงวนสิทธิ์เนื่องจากไม่ตรงตามเงื่อนไขการรับประกัน
  • สินค้าจะต้องเป็นความเสียหายที่เกิดจากตัวอุปกรณ์ ไม่ใช่ความเสียหายที่เกิดจากการใช้งานของตัวลูกค้าเอง เช่น อุปกรณ์ 3.3V แต่จ่ายไฟ 5V การจ่ายไฟเกินทำให้อุปกรณ์เสียหายได้
  • สินค้าต้องอยู่ในสภาพที่สมบูรณ์เช่น ไม่มีรอยไหม้ แตกหัก ไม่มีรอยงัดแงะ หรืออื่น ๆ
  • ความเสียหายที่เกิดขึ้นต้องไม่เกิดจากใช้งานผิดประเภท ดัดแปลง แก้ไข หรือใส่ไฟผิดขั้ว
  • อุปกรณ์ประเภทเซอร์เฟสเมาส์ SMD การบัดกรีมีความเสียงต่ออุปกรณ์เสียหาย ทางร้านขอยกเว้นการรับประกันอุปกรณ์ประเภทนี้
  • การรับประกันเฉพาะ hardware ไม่รวมการอัพเกรด software/firmware ของตัวอุปกรณ์
  • การรับประกัน จะพิจารณาจากข้อเท็จจริง  ขึ้นอยู่กับทาง AllNewStep 
  • การรับประกันเปลี่ยนอุปกรณ์ใหม่ AllNewStep รับประกันสินค้าทุกชิ้นที่ขายในร้าน โดยร้านเป็นผู้รับผิดชอบความเสียหายเอง
  • การรับประกัน นี้ อาจเป็นการเปลี่ยนสินค้าใหม่ หรือ คืนเงิน ขึ้นอยู่กับ AllNewStep พิจารณา ครอบคลุมทั้งตัวสินค้าและค่าจัดส่งทุกอย่าง ยกเว้นค่าใช้จ่ายอื่น ๆ นอกเหนือจากนี้ เช่น ค่าเสียเวลา ค่าปรับที่เกิดขึ้นทั้งหมด
  • ทางร้านมีสิทธิ์ยกเลิกหรือคืนเงินในรายการสั่งซื้อให้ลูกค้าได้
  • ถ้าสินค้าที่ส่งมามีปัญหาทั้งหมดทุกชิ้น AllNewStep จะแนบค่าส่งตอนที่ส่งมาคืนให้ในกล่อง และออกค่าส่งกลับส่งไปให้ลูกค้า ลูกค้าไม่ต้องรับภาระเรื่องค่าจัดส่ง
  • ถ้าส่งมามีอย่างน้อย 1 ชิ้นที่ไม่มีปัญหา ทางร้านออกค่าส่งกลับให้ฟรี แต่ไม่ได้ออกค่าส่งให้ โปรดตรวจสอบให้ละเอียด
  • ถ้าไม่มีชิ้นไหนมีปัญหาเลยทางร้านไม่ได้ออกค่าส่งให้ โปรดตรวจสอบให้ละเอียด
  • การ นับวัน หากสินค้าถึงมือลูกค้าในวันที่ 1/5/2564 ( ตรวจสอบได้จากไปรษณีย์ไทย) เมื่อพบความเสียหาย ลูกค้าจะต้องส่งสินค้ากลับคืนมาที่ AllNewStep ภายในวันที่ 31/5/2564 โดยอ้างอิงจากเลขแทรค ผ่านไปรษณีย์ลงทะเบียน หรือแบบ EMS ถ้ามีเลือกบริการเสริมพิเศษนอกเหนือจากวิธีส่งปกติ เช่น ค่าบริการพิเศษ พกง. ลูกค้าเป็นออกค่าบริการพิเศษนี้เอง
  • กรณีสินค้าไม่มีปัญหา ทางร้านขอไม่รับคืนหรือเปลี่ยนสินค้า โปรดพิจารณาตรวจสอบให้ละเอียดก่อนสั่งซื้อหรือส่งมาให้ตรวจสอบ
  • เมื่อ ทำการส่งเรียบร้อยแล้ว ลูกค้าจะต้อง ส่งหมายเลขพัสดุ tracking ที่สามารถ track ได้จากทางเว็บไซต์ของทางไปรษณีย์ไทย มาให้กับ AllNewStep แล้วเราจะพิจารณาตรวจสอบและแจ้งให้ลูกค้าทราบผ่านทางช่องทาง Email ที่ลูกค้าให้ไว้
บมจ. ธนาคารกรุงไทย สาขาชัยนาท ออมทรัพย์
บมจ. ธนาคารกสิกรไทย สาขาชัยนาท ออมทรัพย์
พร้อมเพย์ สาขา- -
Scan this!
ไกรสร สืบบุญ
098-xxxxxx-9
Accept All Banks | รับเงินได้จากทุกธนาคาร

มีคูปองส่วนลดเพิ่ม พิเศษ ด้านล่างนี้

ขาย ARDUINO
คุณภาพ อันดับ 1

ได้รับรางวัลร้านยอดเยี่ยม
ตั้งแต่ปี 2558
ขาย Arduino
วีดีโอสอน Arduino

สอน esp8266

สอน Arduino IoT
สอน Arduino แบบเร็ว

สอน NodeMCU

อุปกรณ์ Arduino

MEMBER ZONE

พูดคุย-สอบถาม