มีปัญหาUp Code บน NodeMCU V3 ไม่ได้ครับ ภาค 2

Sketch uses 225,941 bytes (5%) of program storage space. Maximum is 4,194,304 bytes. Global variables use 31,884 bytes (38%) of dynamic memory, leaving 50,036 bytes for local variables. Maximum is 81,920 bytes. Uploading 230096 bytes from C:\Users\Pongsak\AppData\Local\Temp\build020d3d48b8bcec12cf6f88d2e7e4685d.tmp/WIFI_NODEMCUV2_TEST.ino.bin to flash at 0x00000000 error: failed sending 1072 bytes .error: failed sending 1044 bytes .error: failed sending 1040 bytes .error: failed sending 1040 bytes .error: failed sending 1070 bytes .error: failed sending 1087 bytes .error: failed sending 1080 bytes .error: failed sending 1062 bytes .error: failed sending 1051 bytes .error: failed sending 1069 bytes .error: failed sending 1084 bytes .error: failed sending 1073 bytes .error: failed sending 1068 bytes .error: failed sending 1088 bytes .error: failed sending 1067 bytes .error: failed sending 1070 bytes .error: failed sending 1074 bytes .error: failed sending 1062 bytes .error: failed sending 1065 bytes .error: failed sending 1064 bytes .error: failed sending 1041 bytes .error: failed sending 1056 bytes .error: failed sending 1114 bytes .error: failed sending 1097 bytes .error: failed sending 1114 bytes .error: failed sending 1081 bytes .error: failed sending 1069 bytes .error: failed sending 1074 bytes .error: failed sending 1082 bytes .error: failed sending 1070 bytes .error: failed sending 1072 bytes .error: failed sending 1055 bytes .error: failed sending 1070 bytes .error: failed sending 1052 bytes .error: failed sending 1068 bytes .error: failed sending 1062 bytes .error: failed sending 1069 bytes .error: failed sending 1068 bytes .error: failed sending 1069 bytes .error: failed sending 1064 bytes .error: failed sending 1084 bytes .error: failed sending 1050 bytes .error: failed sending 1060 bytes .error: failed sending 1051 bytes .error: failed sending 1059 bytes .error: failed sending 1048 bytes warning: espcomm_send_command: didn't receive command response warning: espcomm_send_command(FLASH_DOWNLOAD_DATA) failed warning: espcomm_send_command: wrong direction/command: 0x01 0x03, expected 0x01 0x04 error: espcomm_upload_mem failed

วิธีเข้าโหมด flash โดย

กด ปุ่ม flash ค้างไว้ กดและปล่อยปุ่ม reset แล้วปล่อยปุ่ม flash ครับ

ผมลอง ทำ แล้ว ไม่ได้ ครับ แต่ผมแก้ปัญหา โดย ลบ arduino ide แล้ว ลงใหม่ ใช้ได้แล้ว ครับ ขอบคุณครับ