รหัสสินค้า A3321 ถ้าไม่มีไฟเลี้ยงวงจร จะจำค่าที่ตั้งค่าไว้ ได้หรือเปล่าครับ

ตามข้อมูลจำค่า ดังนี้ครับ

Operation mode
P1: After triggered signal, power relay on time OP, then turn off; within the OP period following operation:
signal being triggered again is not effective
signal being triggered again, start time again
signal being triggered again, reset; disconnect relay, stop timing

P2: giving the trigger signal, the time after shutdown relay CL power relay OP time; then timing, turn off the relay

P3.1: give the trigger signal after the power relay on time OP, CL shutdown time relay; then operating cycle above cycle gaive signal again, shutdown relay stop timing; cycle times (LOP) can be set

P3.2: after connecting. no need to trigger signal, power relay on time OP, CL shutdown time relay; then the operating cycle above timea cycle (LOP) can be set

P4: keeping the function of the signal; if there is no trigger signal, the time will be canceled, relay stay connected; when the signal disappears, timing OP turn off the relay; over time, if no signal again, the time is cleared