ความรู้แน่น ฟรีสำหรับชุมชน ArduinoAll ที่นี่เท่านั้น

ฟรีและดีที่สุด คอร์สอบรม Arduino + NodeMCU
ทำเพื่อแบ่งปัน ห้ามนำไปจำหน่าย หรือเก็บเงินค่าเรียน
  !!!


  


AllNewStep รับประกันคุณภาพทุกชิ้น วันจันทร์-ศุกร์แจ้งชำระสินค้าก่อน 14.00 จัดส่งทันทีวันนี้ค่ะ

กรุงเทพ /ภาคกลาง ได้พรุ่งนี้


*** สินค้าทุกชิ้น ถ้าสามารถทำรายการสั่งซื้อได้ แสดงว่ามีครบทุกรายการค่ะ *** 

พิมพ์ค้นหาบทความ หัวข้อกระทู้ และสินค้าในเว็บ AllNewStep ได้ที่นี่
QUOTE 

เรียนถามเกี่ยวกับ module charger ครับ

arnut

พอดีผมถามไปทาง contact us แล้ว แต่ยังไมได้รับคำตอบ

ผมซื้อ charger ตัวนี้ไป

http://www.arduinoall.com/p/513

รบกวนถามว่า

1. module ตัวนี้สามารถชาร์จแบบแบตสองก้อนต่อแบบขนานได้มั้ยครับ ถ้าได้ จะทำให้เวลาในการชาร์จบวกเป็นสองเท่าใช่หรือไม่

2. ช่อง output Out+Out-  กับ Bat+Bat- ใช้ต่างกันอย่างไรครับ

3. เวลานำไปใช้ สามารถต่อกับขั้วบวกขั้วลบของแบตได้เลยใช่มั้ยครับ แต่สามารถใช้ไปด้วย ชาร์จไปด้วยได้มั้ยครับ

ขอบพระคุณสำหรับคำตอบครับ

QUOTE 
ความคิดเห็นที่ #1
เจ้าของร้าน

-  module ตัวนี้สามารถชาร์จแบบแบตสองก้อนต่อแบบขนานได้มั้ยครับ ถ้าได้ จะทำให้เวลาในการชาร์จบวกเป็นสองเท่าใช่หรือไม่

- เวลานำไปใช้ สามารถต่อกับขั้วบวกขั้วลบของแบตได้เลยใช่มั้ยครับ แต่สามารถใช้ไปด้วย ชาร์จไปด้วยได้มั้ยครับ

- ช่อง output Out+Out-  กับ Bat+Bat- ใช้ต่างกันอย่างไรครับ

ตามหลักการก็น่าจะทำได้ แต่เวลาก็ต้องนานขึ้นด้วย ผมไม่แน่ใจนะครับ ขออ้างอิงข้อมูลเชิงลึก ตาม ic ที่เป็นตัวหลักในการทำงานตามนี้ครับ

Note : The first time access to the battery , it may be between OUT + and OUT- no voltage output , then recharged access 5V voltage protection circuit can be activated , the battery from the B + B- on the short words are open to catch on need to charge your energy to activate the protection circuit. When using a mobile phone charger when you do pay attention to the charger input must be able to output 1A or above , or may not charge properly
 
MICRO USB female and the + next - pads for the power input , access 5V voltage. Lithium anode connected to B + , B- connected battery 's negative terminal. OUT + and OUT- connected loads, such as the positive and negative plates connected mobile booster or other loads .
 
Connect the battery to the B + B-, inserted into the USB female mobile phone charger , the red light is being charged , the green light is fully charged.
 
 
 
 
แสดงความคิดเห็นที่ 1-1 จากทั้งหมด 1 ความคิดเห็น
ขาย ARDUINO
คุณภาพ อันดับ 1

ได้รับรางวัลร้านยอดเยี่ยม
ตั้งแต่ปี 2558
ขาย Arduino
วีดีโอสอน Arduino

สอน esp8266

สอน Arduino IoT
สอน Arduino แบบเร็ว

สอน NodeMCU

อุปกรณ์ Arduino

MEMBER ZONE

พูดคุย-สอบถาม